东莞 BMS 测试厂家  BMS 测试线束

使用微信扫描二维码分享朋友圈，成交更快更简单！

东莞 BMS 测试厂家  BMS 测试线束

东莞 BMS 测试厂家  BMS 测试线束 
额定电压：250V DC-AC (有效值）
额定电流：5.0A
耐压值：250V
工作温度：-25℃～+85℃
绝缘电阻：1000MΩ
接触电阻：20MΩ
线材技术参数
额定电流：5.0A
额定电压：300V DC-AC (有效值）
额定温度：80℃
连接器：
1.胶壳使用尼龙66耐燃聚酰胺树脂
2.端子使用C5191磷青铜板材，表面镀锡
3.胶壳具有耐热性较好，摩擦系数低，耐磨性好，端子具有弹性好，不易氧化，导电性能好等性质
4.采用国内品牌航空头,材质性能好.
线材：
1、导体使用绞线20-24AWG裸铜或镀锡铜
2、绝缘体：UL1007PVC电线耐热聚氯乙烯绝缘
3、具抗酸碱，耐油性，防湿，防霉等性，方便剥皮及剪裁
4、燃烧测试：可通过UL VW-1及CSA FT1，垂直型火焰测试
Automotive battery BMS test harness

Rated voltage: 250V DC-AC (RMS)

Rated current: 5.0A

Pressure value: 250V

Operating temperature: -25 to +85 DEG C

Insulation resistance: 1000M

Contact resistance: 20M

Wire technical parameters

Rated current: 5.0A

Rated voltage: 300V DC-AC (RMS)

Rated temperature: 80

Connector：

1. rubber shell, nylon 66, fire resistant polyamide resin

2. terminals using C5191 phosphor bronze sheet, tin plated

3. rubber shell has good heat resistance, low coefficient of friction, good wear resistance, good elasticity of terminals, easy oxidation, good conductivity and so on

4., the use of domestic brands of aviation head, good material properties

Wire rod：

1 conductors using stranded wire 20-24AWG bare copper or tinned copper

2, insulator: UL1007PVC heat resistant PVC insulated wire

3 、 with acid and alkali resistance, oil resistance, moisture resistance, mildew resistance and so on, easy to peel and cut

4 、 combustion test: vertical flame test can be done by UL, VW-1 and CSA FT1